DescriptionWireless Z-Wave Control on Tap of a FingerThe Aeotec WallMote is a Z-Wave scene controller, capable of controlling hundreds of devices of more than a dozen Z-Wave scenes. When connected to your Z-Wave Controller, get creative with personalized control combinations of your lights, appliances, and Z-Wave devices.Design focused and battery-operated, the Aeotec WallMote lets you directly control 16 different Z-Wave scenes each with more than 15 devices in them. With touch and touch slide capabilities, WallMote offers unparalleled functionalities for your modern smart home. The Quad WallMote from Aeotec is a portable, wall-mounted, smart Z-Wave remote controller.Its surface is fitted with an RGB LED to indicate button actions, that are also accompanied by audible feedback and vibration. The WallMote Quad is also a security Z-Wave device and supports Over The Air (OTA) feature for the product firmware upgrade.Control on Tap of a FingerWhether you control one or many Z-Wave devices – you can do it all with a single tap.Each of WallMote’s button can be programmed to control one or a few Z-Wave devices. A single tap on its smooth WallMote surface can change a single light or a whole room.Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.Wireless switchWallMote and WallMote Quad offer a fine-tuned antenna capable of communicating over an open range of over 150 metres.Always up-to-dateBoth WallMote and WallMote Quad are capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.Extremly elegantWith its minimalist design that measures just 7.7cm wide and a slender 1.9cm deep, both WallMote and WallMote Quad are perfectly balanced.Rechargable batteryWithout the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery that can easily be recharged via the provided micro USB cable.Haptic feedbackWhen you press WallMote’s touch glass you will feel the change -even you may not even be present to see things change. WallMote’s haptic engine confirms your every action via a click sensation.Gen5As a part of Aeotec’s Gen5 range of Z-Wave devices, Wallmote was built upon the latest version of Z-Wave- Z-Wave Plus. Cutting-edge performance and security is crafted into this most advanced battery-powered wall switch.Wireless wall switch for wireless home controlBecause of its directly communication with your Z-Wave gateway, WallMote can be used to control anything that your gateway can. Even things that are not Z-Wave like Smart lighting from Philips Hue or Connected music from Sonos. This means that if it is connected to your gateway, you may simply add it to a scene that WallMote can control.Z-Wave PlusThe Aeotec WallMote Quad is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). Take a look at our “What is Z-Wave Plus” guide for more information
Related products
